ГАРМОШКА

«Harmonic» door opening system

The «Harmonic» sliding system is an innovative and stylish solution for any room, it consists of door leaves, which are connected by loops. When opening, the canvases rotate in the axes of the hinges, thereby forming a so-called «accordion». 

The functionality and versatility of this solution make doors indispensable in a modern interior. Thanks to their design, the doors in the «Harmonic» system are easily rolled up and can be fully opened, freeing up the passage. This is especially convenient when you need to combine two rooms or create a single space. They allow optimal use of space, create flexibility in planning and transform the interior. Make your choice in favor of folding doors and enjoy their benefits every day.

The «Harmonic» system can be applied to the series AGAP.



DESIGN SOLUTIONS

Execution with one-sided bend

Execution with one-sided bend

It is possible to install the system in openings with a height of up to 3250 mm and a width of 522 mm to 6000 mm.
For openings exceeding the maximum size, it is possible to install two systems in a line.
Canvases can be made up to 3.2m high and 30cm to 60cm wide.
It is allowed to produce canvases with a width of 25 cm.  All canvases must be the same width.
The number of canvases in the system must be even, no less than 2 and no more than 22.
Not all combinations of values within the specified ranges are available.
Installation is carried out in the floor and ceiling. Track width - 44mm. The opening of the canvases is carried out synchronously.
For correct operation of the system, it is necessary to provide a free space of at least 5 cm from the plane of the panels, opposite to the direction of the bend when opening.


Execution with double-sided bend

Version with double-sided bend

It is possible to install the system in openings with a height of up to 3250 mm and a width of 804 mm to 6000 mm.
For openings exceeding the maximum size, it is allowed to install two systems in a line.
Canvases can be made up to 3.2 m high and from 50 cm to 80 cm wide.
All canvases must be the same width, except for the first canvas in the line, the width of which is determined by the calculator.
The number of canvases in the system must be at least 2 (one full-size and one narrow) and no more than 8 (seven full-size and one narrow).
Not all combinations of values within the specified ranges are available.
Installation is carried out in the floor and ceiling. Track width - 44mm. The opening of the canvases is carried out synchronously.