Monoblock box EXPORT

Monoblock box EXPORT
Unique design, developed according to the latest European standards.
Monoblock is a single structure consisting of a door frame and telescopic casing.

Modern design

The monoblock design provides coplanarity of the door leaf and platband in one plane, which allows you to create a modern design for your interior.
Monoblock EXPORT

Sustainable Materials

Only high-quality, environmentally friendly materials are used in the manufacture of a monoblock door frame.
Finish - polypropylene from RENOLIT Germany, MDF - from EGGER

Engineering design

  • The vertical and horizontal racks of the box are cut on professional equipment in the factory at an angle of 45 обеспечивает, which ensures perfect mating of the box and the trims to each other.
  • The connection of the box and the casing is carried out using German components: dowels, fixing brackets and special metal clips, which completely excludes the displacement of parts of the structure relative to each other during installation and operation.
  • The platband is fixed from the inside with a special German screw tie, which ensures a perfectly smooth connection without visible gaps during the entire period of operation.

Reversibility

The design of the monoblock is completely reversible, which allows you to change the side of opening the door leaf together with the door frame just before installation if the layout of the room has changed, while not changing the already purchased doors.
Monoblock EXPORT

Doorstep

The elements of the "Support threshold" set are universal, suitable as a threshold installation for a Monoblock box, as well as a support beam for a composition with transoms.
AN INDICATION OF THE PORCH IS A MUST!
порог-опорный-моноблок.jpg

Installing the EXPORT monoblock

1
Applying PVA glue to the corner cut of the box
Applying PVA glue to the corner cut of the box
2
Installation in the holes of the connecting corner braces
Fitting into the holes of the connecting corner braces
3
Fixing the ties with screws
Fixing the ties with self-tapping screws
4
Installing the corner brace for the platband
Installing the corner brace for the platband
5
Applying PVA glue to the corner cut of the platband
Applying PVA glue to the corner cut of the casing
6
Installing the corner brace for the platband
Installing the corner brace for the platband
7
Installing the rear trim in the box
Installing the rear trim in the box

Monoblock box REVERSE

When using the MONOBLOCK EXPORT frame, the door leaves of internal and external opening are in different planes relative to each other (Fig. 1).
In the case of using the MONOBLOCK REVERSE together with the MONOBLOCK EXPORT box, visually both canvases will be in the same plane, while the canvases will open in different directions (Fig. 2).

Моноблок REVERSE.jpg
Monoblock box EXPORT: Х,  L, U, E, N, XN, NK, Z, ZN, LK, STP, STK, SMK.
Monoblock box REVERSE: NK, Z, ZN, LK, STP, STK, SMK (except for 50-59).

Download